ANALISIS KINERJA SIMPANG MENGGUNAKAN PERANGKAT LUNAK KAJI DAN PTV VISTRO (STUDI KASUS: SIMPANG BERSINYAL DAN TAK BERSINYAL PERKOTAAN JEMBER)

  • Sofyan Sauri Program Studi S-1 Teknik Sipil Jurusan Teknik Sipil Fakultas Teknik Universitas Jember
  • Sonya Sulistyono Jurusan Teknik Sipil Fakultas Teknik Universitas Jember
  • Akhmad Hasanuddin Jurusan Teknik Sipil Fakultas Teknik Universitas Jember

Abstract

To determine the level of service of an intersection should be calculated on the performance. And in Indonesia, intersection performance calculations performed using the method MKJI. MKJI methods have software that is KAJI. Along with the changing times, there are other software that circulated in Indonesia, one of which is the PTV Vistro. In contrast to KAJI, this software using HCM 2010. Therefore necessary to analyze the results of calculations both the software. In this study, both the software used to calculate the performance of several examples of intersections in Jember. And then the results of the calculation of performance compared. The analysis shows that at signalized intersections, KAJI and PTV Vistro produce the same degree of saturation pattern. However PTV Vistro tend to produce better performance than the KAJI. Whereas in unsignalized intersections, both the software shows a different pattern.

Published
2014-08-23
How to Cite
SAURI, Sofyan; SULISTYONO, Sonya; HASANUDDIN, Akhmad. ANALISIS KINERJA SIMPANG MENGGUNAKAN PERANGKAT LUNAK KAJI DAN PTV VISTRO (STUDI KASUS: SIMPANG BERSINYAL DAN TAK BERSINYAL PERKOTAAN JEMBER). Prosiding Forum Studi Transportasi Antar Perguruan Tinggi, [S.l.], v. 2, n. 1, aug. 2014. ISSN 2356-0509. Available at: <https://jurnal.unej.ac.id/index.php/PFSTPT/article/view/2973>. Date accessed: 27 feb. 2020.