General standards

Article type

Life Science and biotechnology Journal requires authors to select the appropriate article type for their manuscript i.e., Original Research or Review Articles

 

Templates

Please use our Word templates. 

 

During the interactive review, authors are encouraged to upload versions using track changes. Editors and reviewers can only download the PDF file of the submitted manuscript.

 

Manuscript length

Life Science and biotechnology Journal encourages the authors to closely follow the article word count lengths given in the 'Article types' page of the journals. The manuscript length includes only the main body of the text, footnotes, and all citations within it, and excludes the abstract, section titles, figure and table captions, funding statement, acknowledgments, and references in the bibliography. Please indicate the number of words and the number of figures and tables included in your manuscript on the first page.

 

Language editing

Life Science and biotechnology Journal requires manuscripts submitted to meet international English language standards to be considered for publication.

 

For authors who would like their manuscript to receive language editing or proofreading to improve the clarity of the manuscript and help highlight their research, Life Science and biotechnology Journal recommends the language-editing services provided by the following external partners.

 

Note that sending your manuscript for language editing does not imply or guarantee that it will be accepted for publication by a Life Science and biotechnology Journal. Editorial decisions on the scientific content of a manuscript are independent of whether it has received language editing or proofreading by these partner services or other services.

 

Editage

Life Science and biotechnology Journal recommends the language-editing service provided by our external partner Editage. These services may be particularly useful for researchers for whom English is not the primary language. They can help to improve the grammar, syntax, and flow of your manuscript prior to submission. Life Science and biotechnology Journal authors will receive a 10% discount by visiting the following link: editage.com/Life Science and biotechnology Journal.

 

Language style

The default language style at Life Science and biotechnology Journal is American English. If you prefer your article to be formatted in British English, please specify this on the first page of your manuscript. For any questions regarding style, Life Science and biotechnology Journal recommends authors to consult the Chicago Manual of Style.

 

Search engine optimization (SEO)

There are a few simple ways to maximize your article's discoverability and search results.

 

Include a few of your article's keywords in the title of the article

 

Do not use long article titles

 

Pick 5-8 keywords using a mix of generic and more specific terms on the article subject(s)

 

Use the maximum amount of keywords in the first two sentences of the abstract

 

Use some of the keywords in level 1 headings

 

CrossMark policy

Title

The title should be concise, omitting terms that are implicit and, where possible, be a statement of the main result or conclusion presented in the manuscript. Abbreviations should be avoided within the title.

 

Witty or creative titles are welcome, but only if relevant and within measure. Consider if a title meant to be thought-provoking might be misinterpreted as offensive or alarming. In extreme cases, the editorial office may veto a title and propose an alternative.

 

Authors should avoid:

 

titles that are a mere question without giving the answer

 

unambitious titles, for example starting with 'Towards,' 'A description of,' 'A characterization of' or 'Preliminary study on'

 

vague titles, for example starting with 'Role of', 'Link between', or 'Effect of' that do not specify the role, link, or effect

 

including terms that are out of place, for example the taxonomic affiliation apart from species name.

 

For Corrigenda, General Commentaries, and Editorials, the title of your manuscript should have the following format.

 

'Corrigendum: [Title of original article]'

 

General Commentaries:

'Commentary: [Title of original article]'

'Response: Commentary: [Title of original article]'

 

'Editorial: [Title of Research Topic]'

 

The running title should be a maximum of five words in length.

 

Authors and affiliations

All names are listed together and separated by commas. Provide exact and correct author names as these will be indexed in official archives. Affiliations should be keyed to the author's name with superscript numbers and be listed as follows:

 

Laboratory, Institute, Department, Organization, City, State abbreviation (only for United States, Canada, and Australia), and Country (without detailed address information such as city zip codes or street names).

 

Example: Max Maximus1

1 Department of Excellence, International University of Science, New York, NY, United States.

 

Correspondence

The corresponding author(s) should be marked with an asterisk in the author list. Provide the exact contact email address of the corresponding author(s) in a separate section.

 

Example: Max Maximus*

maximus@iuscience.edu

 

If any authors wish to include a change of address, list the present address(es) below the correspondence details using a unique superscript symbol keyed to the author(s) in the author list.

 

Equal contributions

The authors who have contributed equally should be marked with a symbol (†) in the author list of the doc/latex and pdf files of the manuscript uploaded at submission.

 

Please use the appropriate standard statement(s) to indicate equal contributions:

 

Equal contribution: These authors contributed equally to this work

 

First authorship: These authors share first authorship

 

Senior authorship: These authors share senior authorship

 

Last authorship: These authors share last authorship

 

Equal contribution and first authorship: These authors contributed equally to this work and share first authorship

 

Equal contribution and senior authorship: These authors contributed equally to this work and share senior authorship

 

Equal contribution and last authorship: These authors contributed equally to this work and share last authorship

 

Example: Max Maximus 1†, John Smith2† and Barbara Smith1

†These authors contributed equally to this work and share first authorship

 

Consortium/group and collaborative authors

Consortium/group authorship should be listed in the manuscript with the other author(s).

 

In cases where authorship is retained by the consortium/group, the consortium/group should be listed as an author separated by a comma or 'and'. The consortium/group name will appear in the author list, in the citation, and in the copyright. If provided, the consortium/group members will be listed in a separate section at the end of the article.

 

For the collaborators of the consortium/group to be indexed in PubMed, they do not have to be inserted in the Life Science and biotechnology Journal submission system individually. However, in the manuscript itself, provide a section with the name of the consortium/group as the heading followed by the list of collaborators, so they can be tagged accordingly and indexed properly.

 

Example: John Smith, Barbara Smith and The Collaborative Working Group.

 

In cases where work is presented by the author(s) on behalf of a consortium/group, it should be included in the author list separated with the wording 'for' or 'on behalf of.' The consortium/group will not retain authorship and will only appear in the author list.

 

Example: John Smith and Barbara Smith on behalf of The Collaborative Working Group.

 

Abstract

As a primary goal, the abstract should make the general significance and conceptual advance of the work clearly accessible to a broad readership. The abstract should be no longer than a single paragraph and should be structured, for example, according to the IMRAD format. For the specific structure of the abstract, authors should follow the requirements of the article type or journal to which they're submitting. Minimize the use of abbreviations and do not cite references, figures or tables.

 

For clinical trial articles, please include the unique identifier and the URL of the publicly-accessible website on which the trial is registered.

 

Keywords

All article types require a minimum of five and a maximum of eight keywords.

 

Text

The entire document should be single-spaced and must contain page and line numbers in order to facilitate the review process. The manuscript should be written using either Word or LaTeX. See above for templates.

 

Nomenclature

The use of abbreviations should be kept to a minimum. Non-standard abbreviations should be avoided unless they appear at least four times, and must be defined upon first use in the main text. Consider also giving a list of non-standard abbreviations at the end, immediately before the acknowledgments.

 

Equations should be inserted in editable format from the equation editor.

 

Italicize gene symbols and use the approved gene nomenclature where it is available. For human genes, please refer to the HUGO Gene Nomenclature Committee (HGNC). New symbols for human genes should be submitted to the HGNC here. Common alternative gene aliases may also be reported, but should not be used alone in place of the HGNC symbol. Nomenclature committees for other species are listed here. Protein products are not italicized.

 

We encourage the use of Standard International Units in all manuscripts.

 

Chemical compounds and biomolecules should be referred to using systematic nomenclature, preferably using the recommendations by the International Union of Pure and Applied Chemistry (IUPAC).

 

Astronomical objects should be referred to using the nomenclature given by the International Astronomical Union (IAU) provided here.

 

Life Science Identifiers (LSIDs) for ZOOBANK registered names or nomenclatural acts should be listed in the manuscript before the keywords. An LSID is represented as a uniform resource name (URN) with the following format: urn:lsid:<Authority>:<Namespace>:<ObjectID>[:<Version>]

 

For more information on LSIDs please see the 'Code' section of our policies and publication ethics.

 

Sections

The manuscript is organized by headings and subheadings. The section headings should be those appropriate for your field and the research itself. You may insert up to 5 heading levels into your manuscript (i.e.,: 3.2.2.1.2 Heading Title).

 

For Original Research articles, it is recommended to organize your manuscript in the following sections or their equivalents for your field.

 

Introduction

Succinct, with no subheadings.

 

Materials and methods

This section may be divided by subheadings and should contain sufficient detail so that when read in conjunction with cited references, all procedures can be repeated. For experiments reporting results on animal or human subject research, an ethics approval statement should be included in this section (for further information, see the 'Bioethics' section of our policies and publication ethics.)

 

Results

This section may be divided by subheadings. Footnotes should not be used and must be transferred to the main text.

 

Discussion

This section may be divided by subheadings. Discussions should cover the key findings of the study: discuss any prior research related to the subject to place the novelty of the discovery in the appropriate context, discuss the potential shortcomings and limitations on their interpretations, discuss their integration into the current understanding of the problem and how this advances the current views, speculate on the future direction of the research, and freely postulate theories that could be tested in the future.

 

For further information, please check the descriptions defined in the journal's 'Article types' page, in the 'For authors' menu on every journal page.

 

Acknowledgements

This is a short text to acknowledge the contributions of specific colleagues, institutions, or agencies that aided the efforts of the authors. Should the content of the manuscript have previously appeared online, such as in a thesis or preprint, this should be mentioned here, in addition to listing the source within the reference list.

 

Figure and table guidelines

CC-BY license

All figures, tables, and images will be published under a Creative Commons CC-BY license, and permission must be obtained for use of copyrighted material from other sources (including re-published/adapted/modified/partial figures and images from the internet). It is the responsibility of the authors to acquire the licenses, follow any citation instructions requested by third-party rights holders, and cover any supplementary charges.

 

For additional information, please see the 'Image manipulation' section of our policies and publication ethics.

 

Figure requirements and style guidelines

Life Science and biotechnology Journal requires figures to be submitted individually, in the same order as they are referred to in the manuscript; the figures will then be automatically embedded at the end of the submitted manuscript. Kindly ensure that each figure is mentioned in the text and in numerical order.

 

For figures with more than one panel, panels should be clearly indicated using labels (A), (B), (C), (D), etc. However, do not embed the part labels over any part of the image, these labels will be replaced during typesetting according to Life Science and biotechnology Journal style. For graphs, there must be a self-explanatory label (including units) along each axis.

 

For LaTeX files, figures should be included in the provided PDF. In case of acceptance, our production office might require high-resolution files of the figures included in the manuscript in EPS, JPEG or TIF/TIFF format.

 

To upload more than one figure at a time, save the figures (labelled in order of appearance in the manuscript) in a zip file and upload them as 'Supplementary Material Presentation.'

 

Please note that figures not in accordance with the guidelines will cause substantial delay during the production process.

 

Captions

Captions should be preceded by the appropriate label, for example 'Figure 1.' Figure captions should be placed at the end of the manuscript. Figure panels are referred to by bold capital letters in brackets: (A), (B), (C), (D), etc.

 

Image size and resolution requirements

Figures should be prepared with the PDF layout in mind. Individual figures should not be longer than one page and with a width that corresponds to 1 column (85 mm) or 2 columns (180 mm).

 

All images must have a resolution of 300 dpi at final size. Check the resolution of your figure by enlarging it to 150%. If the image appears blurry, jagged, or has a stair-stepped effect, the resolution is too low.

 

The text should be legible and of high quality. The smallest visible text should be no less than eight points in height when viewed at actual size.

 

Solid lines should not be broken up. Any lines in the graphic should be no smaller than two points wide.

 

Please note that saving a figure directly as an image file (JPEG, TIF) can greatly affect the resolution of your image. To avoid this, one option is to export the file as PDF, then convert into TIFF or EPS using a graphics software.

 

Format and color image mode

The following formats are accepted: TIF/TIFF (.tif/.tiff), JPEG (.jpg), and EPS (.eps) (upon acceptance). Images must be submitted in the color mode RGB.

 

Chemical structures

Chemical structures should be prepared using ChemDraw or a similar program. If working with ChemDraw please use our ChemDraw template. If working with another program please follow the guidelines below.

 

Drawing settings: chain angle, 120° bond spacing, 18% width; fixed length, 14.4 pt; bold width, 2.0 pt; line width, 0.6 pt; margin width, 1.6 pt; hash spacing, 2.5 pt. Scale 100% Atom Label settings: font, Arial; size, 8 pt

 

Assign all chemical compounds a bold, Arabic numeral in the order in which the compounds are presented in the manuscript text.

 

Table requirements and style guidelines

Tables should be inserted at the end of the manuscript in an editable format. If you use a word processor, build your table in Word. If you use a LaTeX processor, build your table in LaTeX. An empty line should be left before and after the table.

 

Table captions must be placed immediately before the table. Captions should be preceded by the appropriate label, for example 'Table 1.' Please use only a single paragraph for the caption.

 

Ensure that each table is mentioned in the text and in numerical order.

 

Large tables covering several pages cannot be included in the final PDF for formatting reasons. These tables will be published as supplementary material.

 

Tables which are not according to the above guidelines will cause substantial delay during the production process.

 

Accessibility

We encourage authors to make the figures and visual elements of their articles accessible for the visually impaired. An effective use of color can help people with low visual acuity, or color blindness, understand all the content of an article.

 

These guidelines are easy to implement and are in accordance with the W3C Web Content Accessibility Guidelines (WCAG 2.1), the standard for web accessibility best practices.

 

Ensure sufficient contrast between text and its background

People who have low visual acuity or color blindness could find it difficult to read text with low contrast background color. Try using colors that provide maximum contrast.

 

WC3 recommends the following contrast ratio levels:

 

Level AA, contrast ratio of at least 4.5:1

 

Level AAA, contrast ratio of at least 7:1

You can verify the contrast ratio of your palette with these online ratio checkers:

 

WebAIM

 

Color Safe

Avoid using red or green indicators

More than 99% of color-blind people have a red-green color vision deficiency.

 

Avoid using only color to communicate information

Elements with complex information like charts and graphs can be hard to read when only color is used to distinguish the data. Try to use other visual aspects to communicate information, such as shape, labels, and size. Incorporating patterns into the shape fills also make differences clearer; for an example please see below:

Supplementary material

Data that are not of primary importance to the text, or which cannot be included in the article because they are too large or the current format does not permit it (such as videos, raw data traces, and PowerPoint presentations), can be uploaded as supplementary material during the submission procedure and will be displayed along with the published article. All supplementary files are deposited to figshare for permanent storage and receive a DOI.

 

Supplementary material is not typeset, so please ensure that all information is clearly presented without tracked changes/highlighted text/line numbers, and the appropriate caption is included in the file. To avoid discrepancies between the published article and the supplementary material, please do not add the title, author list, affiliations or correspondence in the supplementary files.

 

The supplementary material can be uploaded as:

 

data sheet (Word, Excel, CSV, CDX, FASTA, PDF or Zip files)

 

presentation (PowerPoint, PDF or Zip files)

 

image (CDX, EPS, JPEG, PDF, PNG or TIF/TIFF),

 

table (Word, Excel, CSV or PDF)

 

audio (MP3, WAV or WMA)

 

video (AVI, DIVX, FLV, MOV, MP4, MPEG, MPG or WMV).

 

Technical requirements for supplementary images: 300 DPIs, RGB color mode.

 

For supplementary material templates (LaTeX and Word), see our supplementary material templates.

 

References

Life Science and biotechnology Journal use Harvard (author-date). Please check our help center to find the correct style for the journal to which you are submitting.

 

All citations in the text, figures, or tables must be in the reference list and vice-versa

 

The names of the first six authors followed by et al. and the DOI (when available) should be provided

 

Given names of authors should be abbreviated to initials (e.g., Smith, J., Lewis, C.S., etc.)

 

The reference list should only include articles that are published or accepted

 

Unpublished data, submitted manuscripts, or personal communications should be cited within the text only, for article types that allow such inclusions

 

For accepted but unpublished works use 'in press' instead of page numbers

 

Data sets that have been deposited to an online repository should be included in the reference list. Include the version and unique identifier when available

 

Personal communications should be documented by a letter of permission

 

Website URLs should be included as footnotes

 

Any inclusion of verbatim text must be contained in quotation marks and clearly reference the original source

 

Preprints can be cited as long as a DOI or archive URL is available, and the citation clearly mentions that the contribution is a preprint. If a peer-reviewed journal publication for the same preprint exists, the official journal publication is the preferred source. See the preprints section for each reference style below for more information.

 

Harvard reference style (author-date)

Life Science and biotechnology Journal use the Harvard referencing system; to find the correct reference style and resources for the journal you are submitting to. Reference examples are found below, for more examples of citing other documents and general questions regarding the Harvard reference style, please refer to the Chicago Manual of Style.

 

In-text citations

For works by a single author, include the surname, followed by the year

 

For works by two authors, include both surnames, followed by the year

 

For works by more than two authors, include only the surname of the first author followed by et al., followed by the year

 

For humanities and social sciences articles, include the page numbers.

 

Reference list examples

Article in a print journal

Sondheimer, N., and Lindquist, S. (2000). Rnq1: an epigenetic modifier of protein function in yeast. Mol. Cell. 5, 163-172.

 

Article in an online journal

Tahimic, C.G.T., Wang, Y., Bikle, D.D. (2013). Anabolic effects of IGF-1 signaling on the skeleton. Front. Endocrinol. 4:6. doi: 10.3389/fendo.2013.00006

 

Article or chapter in a book

Sorenson, P. W., and Caprio, J. C. (1998). "Chemoreception," in The Physiology of Fishes, ed. D. H. Evans (Boca Raton, FL: CRC Press), 375-405.

 

Book

Cowan, W. M., Jessell, T. M., and Zipursky, S. L. (1997). Molecular and Cellular Approaches to Neural Development. New York: Oxford University Press.

 

Abstract

Hendricks, J., Applebaum, R., and Kunkel, S. (2010). A world apart? Bridging the gap between theory and applied social gerontology. Gerontologist 50, 284-293. Abstract retrieved from Abstracts in Social Gerontology database. (Accession No. 50360869)

 

Website

World Health Organization. (2018). E. coli. https://www.who.int/news-room/fact-sheets/detail/e-coli [Accessed March 15, 2018].

 

Patent

Marshall, S. P. (2000). Method and apparatus for eye tracking and monitoring pupil dilation to evaluate cognitive activity. U.S. Patent No 6,090,051. Washington, DC: U.S. Patent and Trademark Office.

 

Data

Perdiguero P, Venturas M, Cervera MT, Gil L, Collada C. Data from: Massive sequencing of Ulms minor's transcriptome provides new molecular tools for a genus under the constant threat of Dutch elm disease. Dryad Digital Repository. (2015) http://dx.doi.org/10.5061/dryad.ps837

 

Theses and dissertations

Smith, J. (2008) Post-structuralist discourse relative to phenomological pursuits in the deconstructivist arena. [dissertation/master's thesis]. [Chicago (IL)]: University of Chicago

 

Preprint

Smith, J. (2008). Title of the document. Preprint repository name [Preprint]. Available at: https://persistent-url (Accessed March 15, 2018).