PENGENDALIAN KUALITAS PROSES FABRIKASI PANEL KOMPOSIT AMPAS KOPI MENGGUNAKAN METODE TAGUCHI

Quality Control Of Fabrication Process On Spent Coffee Ground Composite Panel Using Taguchi Method

  • Raihaan . Universitas Jember
  • Yuni Hermawan Universitas Jember
  • Ahmad Adib Rosyadi Universitas Jember
  • Mahros Darsin Universitas Jember
  • Robertus Sidartawan Universitas Jember

Abstract

The use of composites has touched various fields, for example in land, sea and air transportation and household appliances. The coffee pulp particle composite panel produces new properties that are unique and affect the characteristics of mechanical strength, especially tensile strength and bending strength [7]. The standard for making good coffee pulp composite panels and producing optimal strength needs to be done [4]. To reduce the air bubbles created, a degasification process needs to be done [5]. In making composites using the hand lay-up method has several main parameters for its tensile strength, where the main parameters used are stirring speed 515 rpm, 915 rpm, 1430 rpm; duration of degasification 7.5 minutes, 10 minutes, 12.5 minutes; degasification pressure -30 kPa, -60 kPa, -90 kPa. The optimal results obtained were 24.88 MPa with an increase of 23.18% from previous studies using the initial combination.

Published
2023-06-21
How to Cite
., Raihaan et al. PENGENDALIAN KUALITAS PROSES FABRIKASI PANEL KOMPOSIT AMPAS KOPI MENGGUNAKAN METODE TAGUCHI. STATOR: Jurnal Ilmiah Teknik Mesin, [S.l.], v. 6, n. 1, p. 12-17, june 2023. ISSN 2962-228X. Available at: <https://jurnal.unej.ac.id/index.php/STATOR/article/view/9533>. Date accessed: 29 may 2024.
Section
Articles