TY - JOUR AU - Subastian, Robi AU - Basuki, Hari Arbiantara AU - Sanata, Andi PY - 2020/06/01 TI - PENGARUH VARIASI PARAMETER KECEPATAN TORCH, TEKANAN OKSIGEN DAN JARAK NOZZLE TERHADAP MATERIAL REMOVAL RATE PADA PROSES OTOMASI GAS CUTTING JF - ROTOR; Vol 12 No 2 (2019)DO - 10.19184/rotor.v12i2.16063 KW - N2 - The number of industries that make building, bridge and machine construction are inseparable from the metal cutting process, to produce optimal output, the process is done automatically. Gas Cutting is a metal cutting technique that uses a combination of oxygen gas and fuel. The purpose of this study was to determine the most optimal combination of low carbon cutting fabrication processes with variations in the Torch Speed ​​parameter (mm / min), Oxygen Pressure (Kg / cm2), Nozzle Distance (mm) to produce the greatest MRR using the taguchi method. From the research, the most optimal combination of parameters on MRR is level 3 torch speed of 475 mm / minute, oxygen pressure at level 3 of 7.5 kg / cm2 and nozzle distance at level 2 of 6 mm. with the contribution of torch speed contribution of 87.39%, oxygen pressure of 10.35%, the effect of the nozzle distance parameter of 1.17%. UR - https://jurnal.unej.ac.id/index.php/RTR/article/view/16063