ANALISA PENGUJIAN EKSTRAKSI METODE SENTRIFUGAL DAN REFLUK PADA CAMPURAN AC-WC

  • Candra Karisma Jurusan Teknik Sipil Fakultas Teknik Universitas Jember
  • Sonya Sulistyono Jurusan Teknik Sipil Fakultas Teknik Universitas Jember
  • Ririn Endah Badriani Jurusan Teknik Sipil Fakultas Teknik Universitas Jember

Abstract

Two methods for determining asphalt content that's usually used are centrifugal and reflux method. Both of The two methods have the same theoretical principle, but different ways to separate mixtures. Centrifugal method separating a mixture by stirring the solvent and sample mechanically, but the reflux method with evaporation. This study, conducted a study of two methods for bitumen extraction test, bitumen extraction comparing results between the two methods, and compare with bitumen content plans. Three levels of AC-WC (5,5%, 6,0% and 6,5%) are used for bitumen extraction. Results of studies using F-test approaches showed significant differences between bitumen extraction test results (reflux and centrifugal) against the bitumen content plan. Indicated by the value of Fcount > Ftable (38,447 > 3,555). While the results of comparison testing between centrifugal and reflux extraction using T-test indicated that there were differences in the test results, but not significantly. Where indicated tcount < ttable (0,997 < 2,4469).Bitumen extraction test results reflux method most closely with bitumen value plans and standard deviation between the smallest test results. However, testing of bitumen extraction methods reflux testing requires a very long time.

Published
2015-12-31
How to Cite
KARISMA, Candra; SULISTYONO, Sonya; BADRIANI, Ririn Endah. ANALISA PENGUJIAN EKSTRAKSI METODE SENTRIFUGAL DAN REFLUK PADA CAMPURAN AC-WC. Prosiding Forum Studi Transportasi Antar Perguruan Tinggi, [S.l.], v. 2, n. 2, p. 868-876, dec. 2015. ISSN 2356-0509. Available at: <https://jurnal.unej.ac.id/index.php/PFSTPT/article/view/2910>. Date accessed: 24 nov. 2024.