Optimasi Kombinasi Polietilen Glikol dan Polivinilpirolidon sebagai Bahan Pembawa pada Dispersi Padat Glibenklamid dengan Desain Faktorial   (Optimization of Polyethilen Glycol and Polyvinylpirolidone Combination as the Carrier in Glibenclamide Solid Disp

Hendra Kurniawan; Budipratiwi Wisudyaningsih; Dwi Nurrahmanto

Optimasi Kombinasi Polietilen Glikol dan Polivinilpirolidon sebagai Bahan Pembawa pada Dispersi Padat Glibenklamid dengan Desain Faktorial (Optimization of Polyethilen Glycol and Polyvinylpirolidone Combination as the Carrier in Glibenclamide Solid Disp

Hendra Kurniawan Fakultas Farmasi Universitas Jember
Budipratiwi Wisudyaningsih Fakultas Farmasi Universitas Jember
Dwi Nurrahmanto Fakultas Farmasi Universitas Jember

Abstract

Glibenclamide is a second-generation sulfonylurea which indicated for the treatment of type II diabetes mellitus. Glibenclamide included in class II of BCS, a drug that have a good permeability but low in solubility. One of techniques that can be used to increase the solubility of glibenclamide is solid dispersion technique. This study was aimed to determine the effect of PEG 6000 and PVP K-30 combination on the melting point of solid dispersion, release of glibenclamide in solid dispersion and the optimum composition of their combination with factorial design method. Melting point response tested using melting point apparatus and percent release response tested by in vitro dissolution test. The results showed that increasing PEG 6000 and PVP K-30 will decrease melting point response and increase percent release response. The optimum composition of those combination was 700 mg of PEG 6000 and 1000 mg of PVP K-30 which provided the smallest melting point at 159,333oC and greatest release as 97.9067%. The optimum composition was characterized using FTIR, DSC and SEM.

Keywords: glibenclamide, PEG 6000, PVP K-30, solid dispersion, factorial design

Published

2016-01-04

How to Cite

KURNIAWAN, Hendra; WISUDYANINGSIH, Budipratiwi; NURRAHMANTO, Dwi. Optimasi Kombinasi Polietilen Glikol dan Polivinilpirolidon sebagai Bahan Pembawa pada Dispersi Padat Glibenklamid dengan Desain Faktorial (Optimization of Polyethilen Glycol and Polyvinylpirolidone Combination as the Carrier in Glibenclamide Solid Disp. Pustaka Kesehatan, [S.l.], v. 4, n. 1, p. 27-34, jan. 2016. ISSN 2721-3218. Available at: <https://jurnal.unej.ac.id/index.php/JPK/article/view/2438>. Date accessed: 06 may 2024.

Citation Formats

Issue

Vol 4 No 1 (2016)

Section

Articles

e-Journal Pustaka Kesehatan has CC-BY-SA or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work. Authors who publish with this journal retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.